Oak Craft are proud to present our most popular Oak frame buildings, supplied and built to order, tailored to suit our client's own specific requirements.

Single Bay Oak Frame Garage with Side Aisle

Dimensions – 4770mm x 5350mm Oak frame
40-degree roof pitch
Ridge height 3600mm
2100mm to underside of eaves
150mm x 75mm Oak sole plate
150mm x 150mm Oak posts
150mm x 170mm Oak ring beam
Treated softwood featheredge cladding to 3 elevations
Treated softwood rafters and ridge timbers

This Building Includes
Open fronted carport design
An enclosed side aisle 1550mm wide, integral to the carport bay
Gable to Gable roof



This beautiful single bay garage with log store is currently included on our Special Offers page.

In certain circumstances this building may be built within Permitted Development Rights however we always recommend you seek the correct guidance from your local Planning and Building Regulation Authority prior to commencement of any works.

If Planning and Building Approval are required, Oak Craft at Holmsley Mill can assist with these applications.

Ground Works, Roof Tiling, Second Fix or Insulation are not part of Oak Craft at Holmsley Mill’s scope of works and will need to be carried out by separate contractors.




2 Bay Oak Frame Garage with Open Side Aisle

Dimensions – 7800mm x 5350mm
40-degree roof pitch
Ridge height 4500mm
2100mm to underside of eaves
150mm x 75mm Oak sole plate
150mm x 150mm Oak posts
150mm x 170mm Oak ring beam
Treated softwood featheredge cladding to 3 elevations
Treated softwood rafters and ridge timbers

This Building Includes
1 internal clad partition to ridge height
1 pair of heavy-duty, softwood garage doors
An open side aisle 1550mm wide, separate to the main garage bays
Fully Hipped Roof



In most areas this building would require Planning and Building Regulation Approval due to the overall height and overall plan area.

OakCraft at Holmsley Mill can assist with these applications.

Ground Works, Roof Tiling, Second Fix or Insulation are not part of Oak Craft at Holmsley Mill’s scope of works and will be carried out by separate contractors.




2 Bay Oak Frame Garage with Rear Aisle

Dimensions – 5930mm x 5450mm Oak frame
37 degrees or less roof pitch for overall ridge height of under 4000mm*
2100mm to underside of eaves
150mm x 75mm Oak sole plate
150mm x 150mm Oak posts
150mm x 170mm Oak ring beam
75mm thick heavy duty curved bracing
Treated softwood featheredge cladding to 3 elevations
Treated softwood rafters and ridge timbers



This very usable two bay garage with rear aisle is currently included on our Special Offers page.

This building would not normally require Planning and Building Regulation Approval due to the overall height and plan area.

*Assumes a ridge tile of 100mm




3 Bay Oak Frame Garage

Dimensions – 9300mm x 5350mm
40-degree roof pitch
Ridge Height 4500mm
2100mm to underside of eaves
150mm x 75mm Oak sole plate
150mm x 150mm Oak posts
150mm x 170mm Oak ring beam
Treated softwood featheredge cladding to 3 elevations
Treated softwood rafters and ridge timbers

This Building Includes
Open fronted carport design
Half Hipped Roof



In most areas this building would require Planning and Building Regulation Approval due to the overall height and overall plan area.

OakCraft at Holmsley Mill can assist with these applications.

Ground Works, Roof Tiling, Second Fix or Insulation are not part of Oak Craft at Holmsley Mill’s scope of works and will be carried out by separate contractors.




The 2 Bay Hambleden
2 Bay Oak Frame Garage with Upper Floor.

Dimensions - 6250mm x 5350mm
45-degree roof pitch
Ridge height 5000mm
2100mm to underside of eaves
150mm x 75mm Oak sole plate
150mm x 150mm Oak posts
150mm x 170mm Oak ring beam
Treated softwood featheredge cladding to 3 elevations
Treated softwood rafters and ridge timbers

This Building Includes
1 pair of heavy-duty, softwood garage doors
1 internal clad partition to eaves height
1 softwood external staircase with softwood single access door
Upper flooring including joists and 18mm chipboard flooring
1 dormer carcass with double glazed window
Gable to Gable roof



In most Counties this building would require Planning and Building Regulation Approval due to the overall height and overall plan area.

Ground Works, Roof Tiling, Second Fix or Insulation are not part of Oak Craft at Holmsley Mill’s scope of works and will be carried out by separate contractors.

Oak Craft at Holmsley Mill can assist with these applications




The 3 Bay Hambleden
3 Bay Oak Frame Garage With Upper Floor.

Dimensions – 10850mm x 5350mm
45-degree roof pitch
Ridge height 5000mm
2100mm to underside of eaves
150mm x 75mm Oak sole plate
150mm x 150mm Oak posts
150mm x 170mm Oak ring beam
150mm x 300mm Oak tie beam between open bays
Treated softwood featheredge cladding to 3 elevations
Treated softwood rafters and ridge timber

This Building Includes
1 pair of heavy-duty, softwood garage doors
1 internal clad partition to eaves height
1 softwood external staircase with softwood single access door
Upper floor deck including joists and 18mm chipboard flooring
2 dormer carcasses with double glazed windows
An enclosed side aisle 1550mm wide, integral to the garage bay
Gable Roof leading to a Half Hip



In most Counties this building would require Planning and Building Regulation Approval due to the overall height and overall plan area.

Ground Works, Roof Tiling, Second Fix or Insulation are not part of Oak Craft at Holmsley Mill’s scope of works and will be carried out by separate contractors.

Oak Craft at Holmsley Mill can assist with these applications.

E+OE.

Contact us for further information or our request our free brochures.

See other popular Oak framed buildings in the Gallery or view our current Special Offers.

Return to Popular Buildings page in the Products Section.